• Czech
  • English
  • German
  • Italian
+420 731 178 338
iveta.gufrovicova@tesogu.cz

+420 722 940 737
peter.gufrovic@tesogu.cz

Minimal lubrication, clamps for coolant or oil mist, compressed air or oil mist, coolant or oil mist up to 50 bar

Minimal lubrication

VM1.N

Machine determined for exact mixing compressed air with oil. It can be used for internal and external machina cooling. Equipment has oil pressure tank and very exact press regulation and quantity oil and air. Using of this machine is mainly in gun drilling in full range from 0,9 mm till 50 mm avarage drill. With using of suitable equipment machine could serve also as a great source quantity of koaxial nozzles to internal machine lubrication.

VM2.N

Machina is determined for exact mixing compressed air with oil. It can be used for internal and external machine cooling. Dispensing of lubricants supports pulse lubricator with exact of quantity of lubricant. Machine is equiped with logical valves,which make possible different kind of connections and setting functions. Machine is able to work in shorter pulses then 0,5 sec. Logical valve make possible active machine connection with sensor e.g. position of spindle. Dribling and threading is possible to set up this operation: after sign of position sensor of spindle, firstly will be blasting of machine chips, then will be dispensing of needed oil on machine. This solution economize of oil consumption and reduce quantity of oil around the machine. Machina is equiped with coaxial notule which make possible exact pointing of oil. Coaxial design of notule and air circilation maximum limited scatter of oil.

VM3.N

Machina is determined for exact mixing compressed air with oil. It can be used for internal and external machine cooling. Machina is supplied of unit ejektor, which guarantuee exact quantity of osil and due to absence of mobile units – absolute machine life. Machina is equiped with coaxial notule which make possible exact pointing of oil. Coaxial design of notule and air circilation maximum limited scatter of oil. Machine is able to work in connection with sensor e.g. spindel position in longer pulses then 0,5 sec. 

Clamps for coolant or oil mist

offered fixtures are divided according to application:

1.) clamps for drilling, coolant or oil mist
2.) clamps for milling, coolant or oil mist

Clamps for compressed air or oil mist

the offered fixtures are divided according to the application:

1.) clamps for drilling, compressed air or oil mist

2.) clamps for milling, compressed air or oil mist

Clamps for coolant or oil mist
up to 50 bar

The clamps are designed for the supply of liquid up to 50 bar, into the center of the tools. Condition for using clamps is media filtered to 0,005mm! The clamps are equipped with an overflow for draining excess media. The service life of the clamps, thanks to the use of an overflow system, sealed with special viton seals and bearings on high-quality rolling bearings, in practice far exceeds the service life of the high-pressure clamps of most reputable manufacturers.

Obsah před patičkou – EN

Looking for more information or need advice?

 

Download Contact